Although every effort has been made to ensure the accuracy of the information featured on this website, in the event that an error is made in the price shown, Future Garage Equipment Services Ltd will not be liable to supply the product at the stated price.

Important notes:

Prices quoted do not include VAT at the current rate.

Payments made by Credit or Debit card may incur an additional surcharge.

Delivery: Unless otherwise stated, prices include delivery to the customers address.

Quoted prices valid for 14 days from the date shown.

Quotations given are for acceptance within 14 days and are subject to revision should the state of the raw material market, currency exchange rate or other circumstances render this action necessary.

Orders, whether received as a result of a quotation or not, can only be accepted for execution at prices ruling at a date of dispatch.

All goods delivered by the Future Garage Equipment Services Ltd (referred to here after as ‘the Company’) to the Purchaser will remain the property of the Company to the intent that the whole legal and beneficial interest therein shall remain that of the Company.

Finance prices are for illustrative purposes only and subject to acceptance, terms and conditions. The Company can not guarantee customers will qualify for the rates shown as they may vary according to status.

If the Purchaser becomes or threatens to become insolvent or being in a body corporate has a Receiver appointed or asses a resolution for winding up or if a Court makes an Order to that effect or being an individual or partnership makes any composition or arrangements with his or their creditors or has a receiving order made against him or them or if the Purchaser shall be in breach of these conditions, then the Company shall be at liberty to forthwith remove and repossess all goods which remain the property of the Company in accordance with this Condition and enter upon any property to do so or to inspect goods to identify the Company’s goods.

Installation: For larger items of equipment including Vehicle Lifts, Roller Brake Testers, MOT Bays and Automated Test Lanes, the cost of installation at a prepared site is usually included in the price indicated. (The definition of a prepared site is outlined below.) At the time of purchase, it is the customer’s responsibility to confirm that the price includes installation.

Unless otherwise stated, the cost of installation is not included in the price of items and goods which can be purchased directly via this website's online shopping facilities. This includes but not exclusively Headlamp Aim Testers, Jacking Beams & Transmission Jacks that are supplied individually and not as a component of a larger installation (i.e. an Automated Test Lane or MOT Bay).

In the case of heavy equipment i.e.: lifts and brake testers, lifting equipment may be required to assist in the process of installation. In this situation any cost relating to lifting equipment will be the customer's responsibility.

Installation At A Prepared Site & The Requirements Of A Prepared Site:

1] A prepared site requires no additional or repositioned civil, ground or structural work, channeling, drainage, feed pipes, electrical power supplies or compressed air supplies specified or required for installation and/or powering the equipment to be installed.

2] Unless stated otherwise, all prices exclude any necessary additional civil, ground or structural work, channeling, drainage, feed pipes, electrical power supplies or compressed air supplies specified or required for installation and/or powering the equipment to be installed.

3] The floor where the installation is to take place must meet the specific standard required by the equipment to be installed. At the customer’s request, the Company can advise on the required floor quality, condition and specification prior to installation. Rectification of sub-standard floor surfaces is at the customer’s expense.

4] In the event of it being necessary to rectify, rebuild or reposition inadequate or inaccurately constructed pits, recesses or any other required ground or civil works that were not sanctioned or approved by the Company or constructed by a subcontractor appointed or approved by the Company it is at the customer’s expense.

5] If requested by the customer, the Company can arrange for a qualified contractor to construct any required additional pits, recesses, civil or ground works required prior to installation but this service is provided at additional cost is not included in the cost of installation and at the customers expense.

6] Where manufacturer's drawings are supplied it is expected that the works will be completed exactly as per the drawings.

7] Services, Mains Power and Compressed Air Supplies: The installation and positioning of suitable power and air supplies is the customer’s responsibility and must be deemed suitable by the Company and/or the installation agent for powering the equipment prior to installation.

8] If requested by the customer, the Company can arrange for a qualified electrician / engineer to install any additional isolators, cabling, compressed air supplies and services etc. required prior to installation but this service is provided at additional cost, is not included in the cost of installation and at the customers expense.

9] Electrical disconnection and reconnection: The Company and/or the installation agent are not permitted by law to leave any electrical connections temporarily made or otherwise still connected on leaving site. The required electrician and any required isolators, cabling or others are the customer’s responsibility. In the event of the customer not being able to source or provide a suitable electrician and if requested by the customer, the Company can arrange for a qualified electrician to disconnect / reconnect the electrical power supplies as and when required on the day(s) of installation. This service is provided at additional cost and at the customer’s expense. Otherwise, the disconnection and re-connection to any mains power supply is strictly the customer’s responsibility and it is the customer’s responsibility to provide an electrician for this purpose on the day(s) of installation.

11] It is the customer's responsibility to seek and confirm agreement with the Company and/or the installation agent that new, existing or present electrical power supplies and compressed air supplies are in a suitable condition and position for powering the equipment prior to installation.

12] In the event of it being necessary to rectify or reposition inadequate power and air supplies, it is at the customer’s expense. This is also the case in the event of it being necessary to install additional power and air supplies.

13] In the event of the site failing to meet all the necessary requirements of a prepared site described above, the Company reserves the right to charge the customer for any resulting additional installation visits.

Used / Secondhand Equipment

Used and second hand equipment is sold as seen and not covered by any warranty unless expressly stated in writing.

Please note: Where a written warranty is offered, consumable items and peripherals including filters, oil temperature probes, RPM measurement devices, petrol exhaust sample probe ends, diesel exhaust sample probe ends, printers and printer cartridges are not covered. Damage or breakdown caused by anything other than spontaneous component failure is not covered by any warranty written or otherwise. For example, damage or breakdown caused by misuse, abuse, neglect, contamination or power surge is not covered by any warranty.

In all circumstances, please refer to your written warranty for details of cover provided. Warranty claims will not be validated without provision of written proof of warranty by the purchaser.

The Company reserves the right to amend prices without prior notice.

Whilst every effort is made to ensure that the information contained in this website and documents published by the Company is accurate, the Company will not be responsible for any errors or omissions. The Company reserves the right to withdraw any price without notice.

Although every effort has been made to ensure the accuracy of published product dimensions, it is the customer's responsibility to confirm that they are current, accurate and up-to-date prior to placing an order.

Full Terms & Conditions of Sale are available on request.

<< back